All Articles
Use Cases 5 min readApril 5, 2026

Designing Neon LED Signs with Hershey Fonts and G-Code

Single-line fonts make LED and neon sign lettering quicker to cut. Learn how to use the single-line stick font in Design Swiftly for single-pass G-code.

M
· CNC Specialist & Lead Developer
Neon SignsLED SignsG-CodeHershey Fonts

Cutting neon sign channel letters and LED backplates is one of the most popular use cases for CNC and laser machines. But most design tools produce outlines — two-stroke paths that your machine has to cut twice. For neon tube bending guides, you need single-line paths, and that's exactly what Design Swiftly's Hershey fonts provide.

What Are Hershey Fonts?

Hershey fonts are a set of typefaces originally created by Dr. Allen Hershey in 1967 for computer plotting. Unlike standard outline fonts, Hershey glyphs are single-stroke paths — the tool follows a single centre line for each letter rather than cutting around its outline.

This means:

  • Fewer G-Code lines than tracing the outline of each letter
  • Faster engraving — one pass per letter, not two
  • Ideal for neon tube bending — the single line represents the tube centre path

Using Hershey Fonts in Design Swiftly

  1. 1Press T or Shift+T to open the Text Tool
  2. 2Click on the canvas to place a text element
  3. 3In the Properties panel, click the Font dropdown
  4. 4Choose the single-line stick font, a simplified font based on the Hershey fonts
  5. 5Type your sign text (e.g. "OPEN", "COFFEE", your brand name)

Setting Up the Neon Sign Cut File

For a LED channel letter backplate cut from 12mm acrylic:

  • Draw the letter outlines using Text → Explode to path
  • Use Offset Tool (+4mm) to create the channel lip
  • Set strategy to Outside Cut, bit = 3mm end mill, depth = 13mm (one pass through 12mm + tab cut)
  • Holding tabs are not yet available in the editor, so hold the letters with screws, tape or an onion-skin pass
  • For the backplate panel: draw a rectangle → Outside Cut

For neon tube bending guides (the centre-line templates your tube bender follows):

  • Create text with a Hershey font
  • Set strategy to On-Path
  • Use a 1.5mm end mill or an engraving bit
  • The output is a single-pass tool path following the tube centre

Exporting the G-Code

Once your toolpaths are set up, click Generate G-Code in the Simulator tab. Inspect the code in the built-in editor, then either:

  • Download the .gcode file to run via USB/SD card
  • Stream directly to your machine using the Machine tab (Web Serial API, Chrome/Edge)
Pro tip: Test cut first

Run a test cut in thin cardboard before committing expensive acrylic. Design Swiftly's 3D simulator is accurate, but material variance always warrants a test.

Try it yourself →

Open Design Swiftly — Free, No Install

No account. No download. Just open and create.

Launch Design Swiftly

More Articles